Flair Temperature Strip (High Heat)

Brew at the correct temperature

Preheating your brew cylinder to the correct temperature is essential for optimal results. With Flair's adhesive Temperature Strips, you can now do this with precision and confidence. Simply place the easy-to-use, easy-to-read strips on your Flair brew head to take control of your brew and improve consistency

As the gauge warms to the response temperature, the window starts with a tan or reddish-brown and continues to change to green.

• TAN window is above actual temperature reading

• GREEN window is actual temperature reading

• BLUE window is below actual temperature reading

• Moisture Resistant: Self-Adhesive Backing

• Estimated Shelf Life of Adhesive: 2 yrs, but will vary depending on application and use

Comes with one (1) customizable temperature strip. Dimensions are 2.25 x .5 inches.  With a range of 158 to 212°F / 70 to 100°C to ensure that your brew head is preheated prior to adding your brew water. 

*Prior to application, ensure surface is clean and dry. During application, ensure that strip lays flat across face of cylinder or other surface and that no gaps or air pockets are present where water could seep in between surface and strip

** Brew head not included.